Cruising Sailors Forum Archive
That window is a slick upgrade, Tom 
In Response To: Every time I replace the belt, I check the play in the bearings. ()
() Probably adds a bit of noise reduction as well. A general pre-start engine inspection has been a ritual dating back tho the A-4.
Plan to wrap this project up today. Just tidying up the wiring to the remote cockpit switch. Been amusing myself by dropping and retrieving the anchor chain in the yard. If there was a little more space between me and the Beneteau I would mount the anchor as well.
Messages In This Thread
- How often do FW cooling pumps fail?
- Whare are you going to be cruising next, Max?
- At about 5000 hours...
- Yanmar 3HM35F with about 4700 hours
- I just learned that a mutual friend is crewing on your first leg
- Is the FW pump in a belt loop with a high output alternator, Max?
- That's my main concern as well, Tom.
- Every time I replace the belt, I check the play in the bearings.
- That window is a slick upgrade, Tom
- That window is a slick upgrade, Tom
- Every time I replace the belt, I check the play in the bearings.
- I installed a 150 amp output Alternator
- That's my main concern as well, Tom.
- Yanmar 3HM35F with about 4700 hours
- When it goes, there's no fixing it.
- Thanks all; I'll get the pump and may even install it
- Whare are you going to be cruising next, Max?