Cruising Sailors Forum Archive
It's not so simple, Steve
In Response To: Which circuit breaker for an anchor windlass ()
The stall load (even momentary) for the windlass is probably well over 150% higher. That will almost always trip a breaker (or pop a fuse) -- even if you have a slow trip device.
Messages In This Thread
- Which circuit breaker for an anchor windlass
- Assuming that the wire size is okay
- Re: Which circuit breaker for an anchor windlass / Think of it as a water pipe. Why would
- It's not so simple, Steve
- I have a Tigress on Tappan Zee and we have used it full time cruising for a couple of years
