Return to Index
Read Responses
Cruising Sailors Forum Archive
really... mineral oil for a cutting board?
In Response To:
Read the Ritchie FAQs
()
I always heard to use olive oil.
Messages In This Thread
thanks for the advice john p (sv piscator); i pried off the rubber cover
compass repair article
unfortunately people say 'mineral oil' and 'mineral spirits' and they're not the same thing.
I'd Call Ritchie and get compass oil. Why screw around?
Mineral Spirits it is. (nm)
Compass fluid
C
It is on the shelf in west marine - next to the relative bearing grease..
I've personally used relative bearing grease..but I can't remember where I was going at the time. (nm)
Wasn't that the trip to see your Mother-in-law (nm) (link)
odorless mineral spirits
Hmm, lemme see.. "Sentimental favorite compass, new ones 150 bucks....
Read the Ritchie FAQs
Only problem is, this is not a Ritchie compass,
90+% of compasses since WWII
Thanks for the link, there are many kinds of mineral spirits
really... mineral oil for a cutting board?
Quote on cutting board oils....
Olive Oil is OK if you clean it well and often (link)
Mineral oil feels like oil, mineral spirit feels like alcohol. (link)
Isn't mineral spirits the same thing as paint thinner?
Right, but unless you open the compass they are both clear (nm) (link)