Cruising Sailors Forum Archive
Then I would just glass tape the seams Tom. 
In Response To: sealing up the seams on a home built dinghy ()
That's not too messy and pretty easy and cheap. You can leave it rough or fill and fair it so it disappears. It will seal the joints.
Messages In This Thread
- sealing up the seams on a home built dinghy
- How about caulking?
- Filleting with epoxy? When the boat is very dry......
- I'd consider fiberglassing the entire outside of the hull
- Then I would just glass tape the seams Tom.
- Several options...
- As a boat builder, in this case, I'd do what Tom Young suggests
- These guys on TV say this will do the trick
