Cruising Sailors Forum Archive

Messages In This Thread

• Next Question....
  • here's a diagram
    • Having replaced mine in this past year...
    • The "pot" is fiberglass
      • So..you don't
        • It may be there for a reason...
          • In all those the "key" was the 12 inches below the injection point.
    • You want it as LOW as possible.
      • It's wet because
        • THINK DRY!!!!
          • It's gotten so I sort of think of using the bilge for storage...
          • OK, I'm interested
            • We (try to) keep ours dry.
          • question Greg
            • I am not sure....
              • I'm not sure this product will work on the Rudder Post ...
        • There are some methods of pumping it out to keep it pretty dry
          • Rule makes a sump kit with a built in pump kit
      • Not really...
        • In the extreme, yes; however,
        • See the link in JDM's post below from Vernalift.
          • It seems that with every boat question...
        • The waterlift muffler needs to be a minimum of 12" below the water injection point...