Cruising Sailors Forum Archive
What happens is that when I bring up the
In Response To: No I said just the opposite. Once you set it up it should be good ()
program on the computer it always comes up on Com 3 but it 5 and 6 say (in use). It won't start on 3 so I have to select 7. After I select 7 it will start the program. The AIS works on the chart plotter but you can't see some of the details about the ships, satellites, etc. without the computer connected.
Messages In This Thread
- Anyone ever connected a WM AIS-1000 to a Lowrance HDS-7?
- Have you tried plugging the serial connection into your laptop and used ProAIS?
- NMEA in- / NMEA out-
- In the HDS Manual
- Speaking of "Com ports", I have to connect
- In WIndows?
- Thanks, My knowledge base is pretty thin
- Why do you need to change it?
- The only reason I would change
- Why do you need to change it?
- Thanks, My knowledge base is pretty thin
- In WIndows?
- Speaking of "Com ports", I have to connect
- Have you set your connection to 38400?
- In the HDS Manual
- Thanks all, I will be trying again tomorrow.
- For the record, I had it miswired.
