Cruising Sailors Forum Archive
If it's a deep bilge and you have the pump on a stick
In Response To: How do you test this... Rule has such a sensor too. 
()
() put the switch on a stick too -- that way you can pull it out and dip it in a bucket of water to test it (and wipe the scmhutz off it to ensure it continues to work).
Messages In This Thread
- Looking for ideas regarding electric bilge pump installation.
- With a properly installed vented loop -- I'd tie the two together
- I always go with a dedicated through-hull in such a case
- how would you mount it in a narrow deep bilge?
- We recently did this in a Dana which has quite a deep sump
- How do you test this... Rule has such a sensor too.
- If it's a deep bilge and you have the pump on a stick
- How do you test this... Rule has such a sensor too.
- Deep Bilge, Pump Install
- We recently did this in a Dana which has quite a deep sump
- Ditto
- how would you mount it in a narrow deep bilge?
- How about a remote pump installation?
- bilge pump ideas
- With a properly installed vented loop -- I'd tie the two together