Cruising Sailors Forum Archive
I've used epoxy syringes quite a bit with good luck 
In Response To: The dorade is fiberglass and molded into the hull 
()
() Like the ones sold as part of the West System. Small but may work for tight places since you're feeling your way inside a box.
Messages In This Thread
- Is Butyl tape suitable as an open corner fillet?
- I would think butyl would work well
- Butyl caulk is very messy
- The butyl tape from MaineSail is very easy to work with
- Put a polyethylene tube on the end of the caulking tube...
- Obviously, the Dorade box must be hard to remove.
- The dorade is fiberglass and molded into the hull
- I've used epoxy syringes quite a bit with good luck
- Hmm, that makes me think you should do something else...
- I've used epoxy syringes quite a bit with good luck
- The dorade is fiberglass and molded into the hull
- Max...
