Cruising Sailors Forum Archive
Nice work! Sometimes you just want to get the right part though, and skip a trip to the lathe.
In Response To: You can also use standard 1 1/4 SCH 80 PVC.... ()
Which can be frustrating, especially as this type of work should be fairly easy. The marine industry has much of it down but some areas are still hazy. And in some cases, suppliers may not carry all the right parts for certain applications, or they don't exist.
Did you find a place in Maine to store DDW?
Messages In This Thread
- Sanitation Hose Question
- Do you have space for two 90-degree elbows and the short connections to provide offset?
- The sanitation hose I used is too stiff for it's own good.
- Another idea
- Thanks for all comments and suggestions!
- Belatedly, my SCH-40 zig-zag...
- The view from below the shelf...
- Wow! You mean these adaptors go to regular Sch 40 pvc pipe Dave?
- A-yah
- You can also use standard 1 1/4 SCH 80 PVC....
- Okay, I have to ask a couple things
- Nice work! Sometimes you just want to get the right part though, and skip a trip to the lathe.
- A-yah
- Looks like some 45 degree fittings ;^)
- Wow! You mean these adaptors go to regular Sch 40 pvc pipe Dave?
- The view from below the shelf...
- I REALLY hope your through-hull fittings
