Cruising Sailors Forum Archive
True! Sometimes you have to run a hand saw through a crack in wood. 
In Response To: Sounds like you gotta widen out the crack a mite..... ()
Or even a router bit. Then you can epoxy in a dutchman that will adhere to both sides. Typical stuff on my boat but without seeing the crack, it's hard to say.
Messages In This Thread
- "OK--wood experts--how do" Fill up and seal
- Nope. Git rot is designed to harden rotted wood, NOT as a repair for cracks
- The "crack" is almost like, not even a crack. It's almost
- Sounds like you gotta widen out the crack a mite.....
- True! Sometimes you have to run a hand saw through a crack in wood.
- True! Sometimes you have to run a hand saw through a crack in wood.
- Sounds like you gotta widen out the crack a mite.....
- The "crack" is almost like, not even a crack. It's almost
- Straight West Systems.
- I would suggest caution.....
- So you are tring to fill a seam that is opening up.
- Flushing with acetone, etc.
- So, after reading all the posts here, this
- Nope. Git rot is designed to harden rotted wood, NOT as a repair for cracks
