Cruising Sailors Forum Archive
Ken, I just received a reply from Tom
In Response To: I'll check my old files for the photos. ()
He says the site has had a facelift but the DNS service is temporally down. He hope to make time to get it back up and running over the weekend. Hopefully your article and photos are still there. Thanks again, Paul
Messages In This Thread
- Rudder Project
- Back in the shop
- (AKA Old Curmudgeon) There is nothing wrong with that rudder!
Throw it back in! 
- THink about adding a bit more body down low?
- I should give that some more thought, Westie
- That's a good thought. Rudder design put more surface down low about then.
- Ericson 35
- That doesn't look like an Ericson 35.......
- The rudder in that pic is more like the one I ended up building for the 32'.
- Paul, how does the rudder stock attach to the rest of the steering?
- The shaft continues 30" beyond the top of the rudder
- What is the joint that attaches the rudder stock to the shaft above?
- Oh, maybe it's one piece all the way through?
- What is the joint that attaches the rudder stock to the shaft above?
- The shaft continues 30" beyond the top of the rudder
- Ericson 35
- That's a good thought. Rudder design put more surface down low about then.
- I should give that some more thought, Westie
- Rudder Replacement
- Thanks, Ken. That's very helpful!
- I'll check my old files for the photos.
- Looks like the site is down, Ken
- Ken, I just received a reply from Tom
- I'll check my old files for the photos.
- Thanks, Ken. That's very helpful!
- Back in the shop
