Cruising Sailors Forum Archive

Messages In This Thread

• If you want a high performance yawl with a centerboard, you might call Bruce Kirby.
  • OK, Tom....question
    • Typically we figure 8 coats for a decent finish
      • I did not start with bare wood....
    • Why not a 3rd coat if all / most the prep is done & masking ...
    • Two, and all through.
  • I wouldn't think that too kindly in a seaway.
    • I suspect it's pretty quick.
      • You must be kidding.
        • I could be wrong, but if so, the rudder is equal draft.
          • Rudder design loads.
          • Our Carbon Fiber rudder is pretty deep too..