Two, and all through.

Return to Index Read Responses

Cruising Sailors Forum Archive

Two, and all through.

In Response To: OK, Tom....question ()

I'm amazed the doors went that long without any maintenance coats, even with just a few hours of Florida sunlight.

http://USHarbors.com

Messages In This Thread

If you want a high performance yawl with a centerboard, you might call Bruce Kirby.
- OK, Tom....question
  - Typically we figure 8 coats for a decent finish
    - I did not start with bare wood....
  - Why not a 3rd coat if all / most the prep is done & masking ...
  - Two, and all through.
- I wouldn't think that too kindly in a seaway.
  - I suspect it's pretty quick.
    - You must be kidding.
      - I could be wrong, but if so, the rudder is equal draft.
        
        Rudder design loads.
        Our Carbon Fiber rudder is pretty deep too..

Return to Index Read Responses

Cruising Sailors Forum Archive is maintained by SailboatOwners.com
Powered by Tetra-WebBBS 6.22 © 2006-2013 tetrabb.com