Cruising Sailors Forum Archive
He might have a long cable run to the radar scanner
In Response To: Yes, you might be able to reinitialize...but ()
and that might be letting voltage drop below some critical startup voltage threshold. If there's a deck connector or splice in the middle, that might also be causing loss.
Messages In This Thread
- Service manual for RadarPC
- We got it. Kudos to Koden
- RADAR PC
- And where did you steal this unit, Sylvain
- do you have a bill of sale from the last registered owner?
- Manuals as PDF and a few notes
- I thought he was asking about the manuals for the 'radar unit' -- not VNS?
- He wrote it came with VNS
- Nobeltec is particular about that.
- He did say "it was never installed'...So Sylvain...
- More on the RadarPC
- (Message Deleted by Poster)
- Noland NM42U
- That's useful but I think you will still need the RS-422 conversion box
- RS-422 to usb for $14
- Call Nobeltec. They need to give you an activation code for RadarPC
- NMEA 0183 is RS-232...
- Our similar unit requires that all is powered downwn, power up radar, wait a minute
- low voltage
- Suspect it's the software or intiiation sequence
- It's true that Nobeltec will only work with data sources it sees on program start up
- Yes, you might be able to reinitialize...but
- He might have a long cable run to the radar scanner
- It's not on the boat yet...
- Yes, you might be able to reinitialize...but
- It's true that Nobeltec will only work with data sources it sees on program start up
- Suspect it's the software or intiiation sequence
- low voltage
- RS-422 to usb for $14
- One other consideration
- That's useful but I think you will still need the RS-422 conversion box
- Noland NM42U
- The message I deleted
- (Message Deleted by Poster)
- More on the RadarPC
- Nobeltec is particular about that.
- He wrote it came with VNS
- I thought he was asking about the manuals for the 'radar unit' -- not VNS?
- We got it. Kudos to Koden
