Cruising Sailors Forum Archive
Messages In This Thread
- Let's talk chain plates
- Photo 2
- Photo 3
- Get rid of those SQUARE holes !!!!!
- Replacements...
- I've always thought I should have gone thicker on the new ones.
- Thoughts
- what about bronze
- "Good" bronze is always OK
- Rich....
- What supports under the chain plates between the 'proud' area?
- Behind the plate....
- And you have backing plates on the inside?
- On the inside...
- I've had good luck with, and good to work with, Garhauer.
- The bolts are what get me...
- Greg, you really don't need to put the new ones
- I've had good luck with, and good to work with, Garhauer.
- On the inside...
- Kinda shakey IMHO. I'd go thicker, can't cost much more for a bit....
- And you have backing plates on the inside?
- Behind the plate....
- What supports under the chain plates between the 'proud' area?
- what about bronze
- What's the story with the link under the cap shroud trnbkl??
- Replacements...
- Get rid of those SQUARE holes !!!!!
- Crevice corrosion...
- Wow exterior plates at that...
- Uhhh, in the future, I'd suggest you modify your opinion of what constitutes "just a bit of discoloration" (grin)
- Titanium Chain Plates
- nice to have chainplates strapped to the outside of your hull, eh?...
- Chain plates - NOW - Boat Jewelry!
- Photo 2
