Cruising Sailors Forum Archive
That's always worked for me too Tom... 
In Response To: I don't know if there's science to support this, a good belt with a small sledge hammer,.. 
()
() your cutless bearing will absorb the shock of the hammer blow - you can put a little PB blaster on it overnight if you like - it should pop off about the second whack or so. (Big puller Good! - Ogg)
Messages In This Thread
- Reached my limit with gear puller...need help
- You know there a nut you have to remove
- I don't know if there's science to support this, a good belt with a small sledge hammer,..
- I urge caution if...
- A very easy way to get the prop off is as follows...
- Once you get the puller in place and
- Use an impact wrench on the puller
- Try them all, one of these ideas will work.
- Recommend more heat.