Cruising Sailors Forum Archive
I've ordered one of these. 
In Response To: Re: Alright, D'Arcy. We're at the same juncture. ()
With a 2" nipple to connect to the hot side and 2 3/8" hose on the cool side. Latest thought is to go with this on the hot side off the manifold: 90 Elbow - 90 Elbow - 45 Elbow - then 45 degree injection elbow 
. I only need a small rise to get my injection point sufficiently above the pot muffler. The muffler will be placed just to port of the transmission.
Messages In This Thread
- Dissecting an antique exhaust system.
- Re: Dissecting an antique exhaust system. / I had one of those and
- You show me yours, I'll show you mine
- Alright, D'Arcy. We're at the same juncture.
- Re: Alright, D'Arcy. We're at the same juncture.
- I've ordered one of these.
- You could also buy a Westerbeke injection elbow
- Might be worth it. All the research I've done, that elbow is the cooling system achilles heel.
- Here's that GOB article for anyone interested.
- On the sailboat my system...
- I've concerns about the riser putting strain on the manifold connection.
- Re: I've concerns about the riser putting strain / My injection elbow is connected
- Had to replace mine +20 years ago
- Thanks. I see you too braced your riser to the hull.
- The strap to that bulkhead helps reduce vibration and joint stress.
- Thanks. I see you too braced your riser to the hull.
- My riser is ...
- I've concerns about the riser putting strain on the manifold connection.
- Re: Might be worth it. Since you mentioned GOB in your post . . .
- Here's that GOB article for anyone interested.
- Might be worth it. All the research I've done, that elbow is the cooling system achilles heel.
- Where did you order from Tom?
- You could also buy a Westerbeke injection elbow
- I've ordered one of these.
- Re: Alright, D'Arcy. We're at the same juncture.
- Alright, D'Arcy. We're at the same juncture.