Cruising Sailors Forum Archive
316 Stainless, copper and bronze are very close 
In Response To: Well, lets see. I only have limited ()
I have never seen an issue from a bronze prop on a stainless shaft. Nor with a bronze thru-hull reacting to the copper in bottom paint.
Messages In This Thread
- Brendon is sinking. Or at least she's trying to sink. Slowly but
- That's not supposed to happen.
- Oh, if it were only true! No, unfortunately
- Sounds familiar.
- Uncontrolled ground current can really do some strange things
- Wow! Another very good reason to track your battery condition
- Double wow! Didn't know it could happen that fast. What I don't get,...
- Oh yes....!
- Current is controlled by resistance. The
- I guess as long as it's bonded correctly, it won't short
- On further thought, I still don't see why this didn't cause a full short.
- Tom, As long as everything is working
- On further thought, I still don't see why this didn't cause a full short.
- I guess as long as it's bonded correctly, it won't short
- Double wow! Didn't know it could happen that fast. What I don't get,...
- A very helpful bit of info
- I assume your boat had bonded thru-hulls?
- Wow! Another very good reason to track your battery condition
- Uncontrolled ground current can really do some strange things
- I hope you put in a fiberglass stern tube
- Sounds familiar.
- Oh, if it were only true! No, unfortunately
- That's not supposed to happen.