Cruising Sailors Forum Archive
I wan't thinking of the switch but the line feed... 
In Response To: The switch can be anywhere. ()
How does line rode stay on the capstan without someone to tail the bitter end? Sorry to be so ignorant but I don't get out much...at least in high tech stuff, so to speak.
Messages In This Thread
- Anchor rode preferences...
- Where is your cruising area??
- Many good points and things to consider TD
- as long as we are on the subject... how do you find out what chain works best?
- I think you COULD get by with a mixed rode; however,
- The gypsy usually has the chain type pressed in to it.
- Rope to chain splice may not work unattended
- Is the splice tapered?
- The line gets stiff if you get it wet and store it (guess) in a dark moist sail locker :^)
- Yes but coming back in it's not stiff...
- I'm fairly ignorant of line rode on a windlass but....
- The switch can be anywhere.
- I wan't thinking of the switch but the line feed...
- I wan't thinking of the switch but the line feed...
- In answer to your question
- The switch can be anywhere.
- Send it in checked luggage.
- The line gets stiff if you get it wet and store it (guess) in a dark moist sail locker :^)
- Something ain't right. either the hawse hole is too small or the splice is too fat. Also check your pressure/control arm
- Is the splice tapered?
- Rope to chain splice may not work unattended
- I don't like to put weight in the bow of my sailboat, but a power boat,...
- Why bother?
- FYI 5/16" chain is about 1.1 lb. per foot.
- go with a brait rode. won't asshole up and takes up less room in the locker.