Cruising Sailors Forum Archive
You might give 
In Response To: Makes sense where I want the parts to come apart... ()
a Yanmar dealer in your area a call and ask what they used on it. That is what I would do. There is so many products that would work, just try to pick the one that works for you.
Greg
Messages In This Thread
- Well still no joy with the engine. Yanmar 2GM20F
- Gene, have you checked the compression?
- Did you bleed at the injectors?
- Good decision to call an engine guy, Gene.
- That's normal for the clicker.
- pump lever
- ah, but I have rotated the engine several times...
- Often, the 2GM20...
- Ron, Greg Dlezynski suggested nearly the same thing.
- Gene, that particular...
- I have raw water turned off.
- One last little caviat...
- Will check. Just removed exaust elbow.
- I MAY HAVE FOUND THE PROBLEM!!!
- GOOD ON YOU Gene!
- I can pretty much guarantee you...
- Took the mixing elbow over to a friends house....
- GOOD ON YOU Gene!
- I MAY HAVE FOUND THE PROBLEM!!!
- Will check. Just removed exaust elbow.
- One last little caviat...
- I have raw water turned off.
- Gene, that particular...
- Ron, Greg Dlezynski suggested nearly the same thing.
- Often, the 2GM20...
- ah, but I have rotated the engine several times...
- This, from my basement, may look familiar.