Cruising Sailors Forum Archive
Are you planning to glass the entire inside of the cockpit well?
In Response To: Complication I have is the two big cockpit locker tops. ()
As far as the trapezoidal cockpit locker lids go if the taper isn't too great you could cut the planking with a matching taper.
Messages In This Thread
- A cockpit well.
- Hoisting points
- I will need some hoisting points.
- Complication I have is the two big cockpit locker tops.
- Are you planning to glass the entire inside of the cockpit well?
- The "modern" approach would be to have a gutter below the lids which drains out into the cockpit.
- That is what I'm doing.
- Sounds like a good plan. As regards the hinge side gutters others must have solved this previously.
- Pondering hinge side...seems my memory conures up the usual.....
- Here's a rough sketch in actual size of my plan.
- I think the gutters are too narrow, Tom.
- Looks about right to me. Couple things I notice......idle curiosity.
- Here's a rough sketch in actual size of my plan.
- Pondering hinge side...seems my memory conures up the usual.....
- Sounds like a good plan. As regards the hinge side gutters others must have solved this previously.
- That is what I'm doing.
- Tom, bear in mind all those trim and joining pieces are there to deal with end grain exposure.
- Complication I have is the two big cockpit locker tops.
- I will need some hoisting points.
- You disappoint me, Tom
- Hoisting points
